Your position >>> On-line order form
TECHNICAL PARAMETER SHEET OF LIFT CONTROL CABINET
BASIC VALUE
1. CTRL MODE: SELECTIVE & COLLECTIVE(KJX ) GOODS LIFT CTRL(XPM)
2. LIFT APPLICATION: NEW LIFT LIFT MODERNIZATION
3.  LIFT BRAND: TYPE  APPLICATION OCCASSION:
4. QTY: UNIT(S)
  (PLS FILL UP OTHER FORM IN CASE OF ANY DIFFERENCE IN CONFIGURATION.)
5. TOTAL FLS ¡¡UNDERGROUND FLS ¡¡LANDINGS
  MAIN FL ¡¡NO-PARKIN FL
6. LIFT SPEED(M/S)   7. LOADING(KG)    8. SUSPENSION RATIO 1:1 2:1
*
MAIN CONTROLLER
 WP-CAN2100 SIMPLEX CTRL
WP-CAN3000 DUPLEX CTRL		 PASSENGER LIFTS, FLS UP TO 64, LIFT SPEED UP TO 4.0m/s, VVVF DRIVE
OPTION OF ADDITIONAL CHARGE:
UPS BACK-UP OPERATION FIRE RETURN
LOP STYLE: DUPLEX LOP SIMPLEX LOP
WP-CAN3200 SIMPLEX¡¢DUPLEX & GROUP CONTROL DOUBLE 32-BIT CPU SERIAL CTRL, PASSENGER LIFTS, FLS UP TO 64, LIFT SPEED UP TO 6.0m/s,VVVF DRIVE
OPTION OF ADDITIONAL CHARGE:
UPS BACK-UP OPERATION FIRE RETURN
LOP STYLE:: DUPLEX LOP SIMPLEX LOP
WESUP2000-V1 PARALLEL CTRL, P&G LIFTS, FLS UP TO 8, LIFT SPEED UP TO 1.75m/s, VVVF DRIVE
WP1000 PARALLEL CTRL, GOODS LIFTS, FLS UP TO 6, LIFT SPEED UP TO 1m/s
DRIVE MODE:
TWO-SPEED (RESISTANCE SWITCHING SOFT STARTER)
YASKAWA INVERTER
VOLT.STATUS
1. AREA: CHINA EUROPE JAPAN NORTH AMERICA SHIPPING USAGE
  OTHER
2. 3-PHASE POWER SUPPLY VOLT.(ACV)
3. ELECTRIC WEB FREQUENCY (Hz)
* TRACTION MACHINE
 SYNCHRONOUS
1.MACHINE MANUFACTURER 2. MOTOR MODE:
3.MOTOR POWER(KW) 4.RATED CURRENT(A)
5. RATED ROTATION: RPM (POLES )
6. RATED FREQUENCY(Hz) 7.BRAKING VOLT  DC AC
8.BRAKING INSPECTION SWITCH: YES NO
9.SPECIAL BRAKING REQUIREMENT
10.MOTOR WINDING(FOR WP1000 ONLY):
YY/¡÷(ADDITIONAL STAR CONTACTOR REUIRED)
HIGH/LOW-SPEED SEPARATE WINDING
ASYNCHRONOUS
* INVERTER UNIT
 SYNCHRONOUS INVERTER 1.STANDARD CONFIGURATION:
YASKAWA(676GL5-IP) SIEI(AVY-M-L) WIPO(WP5000)
2.CUSTOMER DEFINED BRAND & TYPE:
3.COUNTWEIGHT COMPENSATION UNIT IS SUGGESTED FOR YASKAWA-IP INVERTER, STANDARD OTHER TYPE:
ASYNCHRONOUS INVERTER 1.STANDARD CONFIGURATION:
WIPO (WP5000) YASKAWA (616G7)
2.CUSTOMER DEFINED BRAND & TYPE:
INVERTER POWER CUSTOMIZE
(PLS INDICATE HERE IF INVERTER POWER IS REQUIRED TO BE HIGHER): KW
DOOR MACHINE
1. MANUFACTURER
2. DOOR MOTOR VOLT(V) ( AC  DC)
3. DOOR DRIVE MODE:
  VVVF DC RESISTANCE DC BOARD OTHER:
4. DOOR PROTECTION: SAFETY EDGE LIGHT CURTAIN
5 DOOR BRAKING: YES NO VOLT(V) ( DC AC)
6. PLS INDICATE OPEN/CLOSE DOOR REQUIRMENT HERE IN CASE OF TWO DOOR MACHINES:
  FRONT-DOOR ONLY FL REAR-DOOR ONLY FL
  SIMULTANEOUS FRONT & REAR DOOR FL
  SWITCHING FRONT/REAR DOOR FL
  OTHER SPECIFIC REQUIREMENT
COP & LOP
 WP-CAN-2100
WP-CAN-3000
1.(STANDARD)WP-CAN03A,
2.(STANDARD)WP-CAN03C(ONLY USED FOR WP-CAN3200)
  OPTIONAL: VERTICAL DISPLAY WP-CAN03B
    VERTICAL DISPLAY WP-CAN03D(FOR WP-CAN3200)
    LOP LCD WP-CAN06B
      LCD DISPLAY CONTENT
3.LOP PUSH-BUTTON LAMP VOLT:24VDC COMMON ANODE
WP1000
WESUP2000-V1
1. DISPLAY CODE MODE:
  7-SEGMENT BINARY BCD GRAY OTHERS:
2. (STANDARD) DOT-MATRIX DISPLAY WESUP01A APPLIED
3. FL & DIRECTION DISPLAY VOLT(VAC) : VAC VDC
  ( COMMON CATHODE  COMMON ANODE)
4. LOP PUSH-BUTTON LAMP VOLT:24VDC COMMON ANODE
1. MANUFACTURER
2. DISPLAY CONTENT(PLS INDICATE IN CASE OF SPECIAL REQUIREMENT)
3. EMERGENCY LIGHT SUPPLY UNIT VOLT:
  INPUT (V)  (AC  DC)    
OUTPUT(V)  (AC  DC)
4. CABINE INTERCOM: YES  NO    SUPPLY VOLT(V)DC
  INTERCOM MODE:
 
(MACHINE ROOM --- CAR; MACHINE ROOM --- CAR TOP)
(MACHINE ROOM --- CAR; MACHINE ROOM --- CAR TOP; MACHINE ROOM --- PIT;
  WATCHING ROOM --- CAR; WATCHING ROOM --- CAR TOP; WATCHING ROOM --- PIT)
ARRIVAL INDICATION
MODE: CAR ARRIVAL CHIME VOLT(V)( AC DC)
  VOICE ANNOUNCEMENT UNIT: WP-CAN08A (SERIAL COMMUNICATION)
  VOICE ANNOUNCEMENT UNIT: WESUP08A (PARALLEL COMMUNICATION)
  LOBBY ARRIVAL CHIME(LIGHT) ONLY FOR WP-CAN3200, MUST USE LOP DISPLAY
    BOARD WP-CAN03C
MRL APPLICATION
1. BRAKE RELEASE OPERATION WHEN POWER FAILURE:
  YES ( MECHANICA ELECTRIC)
  NO
  MECHANICAL RELEASE HANDLER INSIDE THE CONTROLLER CABINET YES NO
2. GOVERNOR REMOTE OPERATION:
  YES( MECHANICAL ELECTRIC VOLT(V): AC DC)
  NO
  MECHANICAL GOVERNOR HANDLER INSIDE THE CONTROL CABINET YES NO
3. MOTOR'S INSTALLATION POSITION
4. CABINET INSTALLATION METHOD: BESIDE THE WALL IN THE WALL
  CABINET INSTALLATION POSITION SPECIFIC REQUIREMENT:
5. CABINET EXTERNAL DIMENSION
  STANDARD 2000*550*300
  SPECIFIC DIMENSION:
6. OBSERATION HOLE:
  YES(STANDARD DIMENSION:H*W 250*100:REQUIRED HOLE POSITION: )
  NO
7. CABINET DOOR OPENING DIRECTION:
  LEFT->RIGHT (CHAIN AT LEFT SIDE OF THE CABINET DOOR)
  RIGHT->LEFT (CHAIN AT RIGHT SIDE OF CABINET DOOR)
SPECIAL REQUIREMENT
 1. PLUG-IN CONNECTION(WP-CAN2100/3000): YES NO
2. ENLISH MENU: YES NO
3. SPECIAL REQUIREMENTS FOR THE NAMEPLATE OF THE CONTROL CABINET:
OTHER & OPTION
 1. MAGNET SWITCH AT DOOR ZONE
2. ROTATED ENCODER(AXES DIAMETER MM ,IMPULSES PPR,VOLT )
3. IC CARD(PLS FILL OUT A PARAMETER SHEET FOR IC CARD)
4. REMOTE OBSERVATION AND CONTROL OPTION
 
COMPANY NAME: ADD:
TEL: FAX:
CONTACTOR: DATE:
Consignee Zip: Consignee:
Consignee Tel:  
Consignee Add: